
500kW-1000kW Medium Power Gas Generator Set
Gas generator sets in the 500kW-1000kW power range are the main power supply equipment for distributed energy scenarios. Adopting supercharged intercooled lean combustion technology, the power generation efficiency is stable above 42%, with rated power covering mainstream models such as 500kW, 600kW, 800kW and 1000kW, supporting 400V low-voltage output or 10kV high-voltage direct grid connection, which can adapt to the power supply demand of different scenarios. The unit adopts skid-mounted or containerized integrated design, covering an area of only 12-20 square meters, with convenient transportation and installation, and supports automatic unattended operation. When matched with a waste heat recovery system to realize combined heat and power, the comprehensive energy efficiency can reach more than 85%. The equipment can adapt to a variety of gases such as natural gas, biogas, coal mine gas and oilfield associated gas, and the nitrogen oxide emission can be controlled within 50mg/Nm³. It has the characteristics of high cost performance, flexible deployment and stable operation, and is the preferred power supply scheme for small and medium-sized industrial users, energy stations and residual gas utilization projects.
500kW-1000kW Medium Power Gas Generator Set Description
1.Outstanding cost performance advantage. The unit kilowatt cost of the whole machine procurement is 15% lower than that of small-power units. A 500kW unit can generate 500 kWh of electricity per hour when operating at full load, and can achieve revenue of more than 2 million yuan when operating for 8,000 hours per year. The investment payback period is generally shorter than 2.5 years, and the equipment price difference can be recovered in 3 years compared with diesel units of the same power.
2.Strong deployment flexibility. Adopting skid-mounted integrated design, the whole machine weighs only 8-15 tons, can be transported by ordinary freight vehicles, and can be put into operation only by connecting gas, electricity and water on site. The installation and commissioning cycle is no more than 3 days, which can quickly respond to the needs of temporary power supply, urgent project launch and other scenarios.
3.Wide fuel adaptation range. It can adapt to various gases with methane concentration of 30%-99%. Through the automatic air-fuel ratio adjustment technology, stable combustion of gases with different calorific values is realized. Under low calorific value conditions, the power attenuation is less than 5%. It can directly use waste resources such as industrial waste gas, breeding biogas and landfill gas to generate electricity, and the fuel cost can be as low as 0.15 yuan/kWh.
4.Low operation and maintenance cost. The core components adopt wear-resistant design, the oil change cycle can reach 500 hours, the overhaul interval is not less than 35,000 hours, the types of wearing parts are few and the price is low. The annual operation and maintenance cost is only 3% of the equipment purchase price, which is 40% lower than that of diesel units of the same power, and the design life can reach more than 20 years.
5.Excellent environmental performance. Adopting low-nitrogen combustion technology, the nitrogen oxide emission can be as low as 50mg/Nm³, which can meet the national environmental protection requirements without additional denitration device. The carbon emission intensity is only 48% of that of coal-fired units. A single 1000kW unit operating for 8,000 hours per year can reduce carbon emissions by 6,400 tons, which meets the requirements of green and low-carbon development.
500kW-1000kW Medium Power Gas Generator Set Applications
1.In-situ utilization of associated gas in small and medium-sized oil and gas fields. The vented associated gas generated during drilling can be directly used for power generation. A single 800kW unit can recycle 960,000 cubic meters of associated gas annually and reduce carbon emissions by 1,536 tons. The generated power can meet the full power demand of drilling platforms and operation bases, and the excess power is sold to the grid, generating an annual income of more than 3 million yuan.
2.Construction of distributed energy stations in industrial parks. Adopting the combined heat and power mode, it can provide power and steam supply for industrial parks of 1-3 square kilometers, with a comprehensive energy utilization efficiency of 85%, reducing energy cost by 30% compared with the traditional energy supply mode. A 1000kW unit can meet the heating and production steam demand of 50,000 square meters of industrial buildings.
3.Biogas resource utilization in large livestock and poultry farms and small and medium-sized landfills. All biogas generated from breeding manure and garbage degradation can be recovered for power generation. A 500kW unit can consume 1.2 million cubic meters of biogas annually, equivalent to processing 30,000 tons of livestock and poultry manure, with an annual power generation capacity of 4 million kWh, which can meet the power demand of the farm itself and realize the income generation of surplus power connected to the grid.
4.Backup power supply for commercial complexes and tertiary hospitals. The start-up response speed is fast, it only takes 30 seconds from cold start to full load operation. When the power grid fails, it can quickly switch power supply, with stable power supply quality and voltage and frequency fluctuation less than ±1%, which can meet the power supply demand of important loads such as elevators, medical equipment and emergency lighting, and ensure the continuity of power supply in special scenarios.
5.County-level power grid peak shaving auxiliary service. The unit is flexible in start-stop and can quickly respond to power grid load fluctuations. It cooperates with the development of county-level distributed photovoltaics and wind power to stabilize the fluctuation of new energy output. A single 1000kW unit can participate in peak shaving service for more than 1,500 hours annually, helping the county-level power grid improve the renewable energy consumption capacity by more than 10% and reduce the pressure of power grid peak-valley difference.
